Save 44%

HH Scott wood cabinet case fits amps preamps tuner from 1960 99D 210 330 331

List price: $350.00
$195.00
You save: $155.00 (44%)
scottcabinet5
Out-of-stock

Vintage HH Scott cabinet, all original from around 1960 ! 

Really great looking survivor and will sell quickly! 

Fits a multitude of HH Scott components, both factory and kit built. 
These are the nicer, early variety of HH Scott's one size fits all cabinet. They came beautifully finished in Blonde and Mahogany, and a little later , as it became the cats meow with the late 1950s HiFi crowd... this as you can see is the tantalizing latter. It's very old and original. This is the last in stock, original HH Scott cabinet we have -- and this one is stellar, near mint. The Walnut finish is in terrific surviving original shape, and only needs a slight wipe down with wax or fresh oil of your choice.  It is nearly free of damage -- just a couple of scuffs from age, and a tiny veneer chip, less than 1/8" wide and deep, on the side, bottom edge ... very slight and hard to see (see exhibit C) - this is nearly perfect.  The original anodized aluminum vent screen has a few tiny dark areas from slight tube heat many years ago.
This cabinet  presents beautifully, and is quite solid, with original anodized vent insert feet, and importand stock rubber shims, and screws..

This was the preferred cabinet, in Walnut veneer offered by HH Scott, back in the late 1950s -- it fits all the integrateds, preamps and tuners -- like 99, 210, 121 preamp, 330 an 331 stereo tuners. It may also fit your later HH Scott .. check measurements below. 
This is the earlier 1950's style of HH Scott cabinet for integrated amps, preamps and tuners -- the measurements stayed the same until the early 1960s and the older cabinets are allot nicer (made from real veneered plywood, gourgeous really) --much hard to find these early ones, before they moved to pressboard..... so you can dress up your HH Scott from the mid 1960s era and beyond...

Please be sure to measure your application first....measurements are approximate, 
This cabinet measures ID is:   12 3/16" face to rear 33.5mm (where your Scott's face sits in slightly recessed), and 14 3/4"w x 4 7/16" high
The OD dims are: 4 3/4" high x 15 5/8" wide x 12 5/16" deep

See exhibit F for listed applications, orig catalog listing (this is model 94 SX 580). And, Exhibits A-H for more examples. This case seems to be all original and presents wonderfully.  This cabinet is near mint, with only a few tiny flaws for it's age ---thus it presents as gourgeous and will dress up almost any Scott that fits nicely! All previous HH Scott cabinets have sold out in under 24 hours -- this one will go quickly, so if you need it, Buy Now to avoid a bidders war. 
Packed weight is 11lbs. Will be carefully packed in strong double box and dispatched quickly after payment.  Because of the size, and light weight, dimensional shipping rates may apply. See my 100% feedback on all vintage audio items.

Save 44%

HH Scott wood cabinet case fits amps preamps tuner from 1960 99D 210 330 331

List price: $350.00
$195.00
You save: $155.00 (44%)
scottcabinet5
Out-of-stock

Vintage HH Scott cabinet, all original from around 1960 ! 

Really great looking survivor and will sell quickly! 

Fits a multitude of HH Scott components, both factory and kit built. 
These are the nicer, early variety of HH Scott's one size fits all cabinet. They came beautifully finished in Blonde and Mahogany, and a little later , as it became the cats meow with the late 1950s HiFi crowd... this as you can see is the tantalizing latter. It's very old and original. This is the last in stock, original HH Scott cabinet we have -- and this one is stellar, near mint. The Walnut finish is in terrific surviving original shape, and only needs a slight wipe down with wax or fresh oil of your choice.  It is nearly free of damage -- just a couple of scuffs from age, and a tiny veneer chip, less than 1/8" wide and deep, on the side, bottom edge ... very slight and hard to see (see exhibit C) - this is nearly perfect.  The original anodized aluminum vent screen has a few tiny dark areas from slight tube heat many years ago.
This cabinet  presents beautifully, and is quite solid, with original anodized vent insert feet, and importand stock rubber shims, and screws..

This was the preferred cabinet, in Walnut veneer offered by HH Scott, back in the late 1950s -- it fits all the integrateds, preamps and tuners -- like 99, 210, 121 preamp, 330 an 331 stereo tuners. It may also fit your later HH Scott .. check measurements below. 
This is the earlier 1950's style of HH Scott cabinet for integrated amps, preamps and tuners -- the measurements stayed the same until the early 1960s and the older cabinets are allot nicer (made from real veneered plywood, gourgeous really) --much hard to find these early ones, before they moved to pressboard..... so you can dress up your HH Scott from the mid 1960s era and beyond...

Please be sure to measure your application first....measurements are approximate, 
This cabinet measures ID is:   12 3/16" face to rear 33.5mm (where your Scott's face sits in slightly recessed), and 14 3/4"w x 4 7/16" high
The OD dims are: 4 3/4" high x 15 5/8" wide x 12 5/16" deep

See exhibit F for listed applications, orig catalog listing (this is model 94 SX 580). And, Exhibits A-H for more examples. This case seems to be all original and presents wonderfully.  This cabinet is near mint, with only a few tiny flaws for it's age ---thus it presents as gourgeous and will dress up almost any Scott that fits nicely! All previous HH Scott cabinets have sold out in under 24 hours -- this one will go quickly, so if you need it, Buy Now to avoid a bidders war. 
Packed weight is 11lbs. Will be carefully packed in strong double box and dispatched quickly after payment.  Because of the size, and light weight, dimensional shipping rates may apply. See my 100% feedback on all vintage audio items.